Jetprime
ABS eliminator for Yamaha MT-03
$198.0ABS Eliminator for Yamaha MT-03.
For a racing use, the original ABS work is not suitable because it lengthens the breaking too much, especially in low grip conditions.
Our device allows to remove the ABS modulator from the bike, saving about 1 kg of weight.
No error lights will be lit on the dashboard and all normal functions will work properly.
WARNING: if you have a “GET” Engine Control Unit mounted on the bike, removing the ABS will result in the speedometer not working, problem solved by our electronic eliminator which makes it works again.
Throttle control with integrated handlebar switch for Ducati Streetfighter V4
$345.6Throttle control with integrated handlebar switch for Ducati Streetfighter V4
Throttle control entirely machined from solid Ergal, significantly more durable than the original plastic component.
In the event of a crash, it offers enhanced protection for the internal electronics and integrates the electrical controls found in the original throttle assembly.
ATTENTION: Use your original electronic throttle unit. The electronic throttle is not included in the kit.
Memjet EVO power module for KTM 1290 Super Duke (MJ 007)
$168.0Memjet EVO power module for KTM 1290 Super Duke (MJ 007)
The Memjet EVO power module is designed to optimize the performance of motorcycles with electronic fuel injection. Developed through years of research and extensive testing on various models, both on the dyno and on the road, the Memjet EVO improves engine response and throttle smoothness without invasive modifications.
The module works by modifying the output values from the motorcycle’s air temperature sensor, allowing the original ECU to automatically adjust the fuel injection. This enhances overall performance without the need for remapping or interventions by a specialist technician with a dyno.
The module features an adjustment range from 0 to 10: setting it to 0 keeps the motorcycle in standard configuration with no intervention, while increasing the value gradually enriches the fuel injection to achieve the best performance according to the bike’s tuning level.
Installation is simple, fully reversible, and does not permanently alter the motorcycle’s original system.
Plug-and-play product supplied with wiring specific to the chosen motorcycle model.
Jetprime programmable control unit for KTM 1290 Super Duke (CJP 072C)
$276.0Jetprime programmable control unit for KTM 1290 Super Duke (CJP 072C)
The Jetprime programmable control unit, developed through track experience, is designed to deliver high performance at a competitive price.
The system is installed between the original ECU and the injectors, allowing you to modify the signals sent by the ECU to precisely manage the air/fuel ratio.
The Jetprime control unit makes it possible to adapt fueling to your needs, environmental conditions, or motorcycle configuration—particularly useful when using racing exhausts or air filters.
Programming is carried out via PC using dedicated software that allows you to create and customize the fuel map according to the engine setup.
Installation is simple, fully reversible, and does not permanently alter the motorcycle’s original system.
Plug-and-play product supplied with wiring specific to the chosen motorcycle model.
PAIR system elimination kit for KTM 1390 Super Duke R
$109.2PAIR system elimination kit for KTM 1390 Super Duke R
Complete kit for PAIR system removal, composed of the CNC-machined aluminum plates replacing the original covers, rubber plug closing the hole in the airbox, and electronic eliminator that bypasses the PAIR system’s solenoid valve circuit, allowing its removal without triggering errors from the ECU.
PAIR system eliminator cover for KTM 1390 Super Duke R
$91.2PAIR system eliminator cover for KTM 1390 Super Duke R
CNC-machined aluminum plates replacing the original covers and rubber plug closing the hole in the airbox.
PAIR solenoid eliminator for KTM 1390 Super Duke R
$28.8PAIR solenoid eliminator for KTM 1390 Super Duke R
The solenoid eliminator is a plug-and-play device that bypasses the PAIR system’s solenoid valve circuit, allowing its removal without triggering errors from the ECU.
Left Street Handlebar Switch for Kawasaki Ninja ZX-10R 2004/2010 (Titanium)
$357.6Left Street Handlebar Switch for Kawasaki Ninja ZX-10R 2004/2010 (Titanium)
Jetprime handlebar switches are interchangeable with the original switches and can be applied to the motorcycle handlebar without needing any further modifications. Plug and play product specific to each motorcycle model.
Left Street Handlebar Switch for Kawasaki Ninja ZX-10R 2004/2010 (Red)
$357.6Left Street Handlebar Switch for Kawasaki Ninja ZX-10R 2004/2010 (Red)
Jetprime handlebar switches are interchangeable with the original switches and can be applied to the motorcycle handlebar without needing any further modifications. Plug and play product specific to each motorcycle model.
Left Street Handlebar Switch for Kawasaki Ninja ZX-10R 2004/2010
$357.6Left Street Handlebar Switch for Kawasaki Ninja ZX-10R 2004/2010
Jetprime handlebar switches are interchangeable with the original switches and can be applied to the motorcycle handlebar without needing any further modifications. Plug and play product specific to each motorcycle model.
Right Street Handlebar Switch for MV Agusta Superveloce 800 (Misaligned holes)
$248.4Right Street Handlebar Switch for MV Agusta Superveloce 800 (Misaligned holes)
Jetprime handlebar switches are interchangeable with the original switches and can be applied to the motorcycle handlebar without needing any further modifications. Plug and play product specific to each motorcycle model.
ATTENTION: this handlebar switch is designed to be mounted on the brake master cylinder in place of the original clamp. It is important to check the arrangement of the mounting holes present on your brake master cylinder to choose the correct version.
Right Street Handlebar Switch for MV Agusta Brutale (Misaligned holes)
$248.4Right Street Handlebar Switch for MV Agusta Brutale (Misaligned holes)
Jetprime handlebar switches are interchangeable with the original switches and can be applied to the motorcycle handlebar without needing any further modifications. Plug and play product specific to each motorcycle model.
ATTENTION: this handlebar switch is designed to be mounted on the brake master cylinder in place of the original clamp. It is important to check the arrangement of the mounting holes present on your brake master cylinder to choose the correct version.
Canada
USA
Japan