Jetprime
Throttle control with integrated handlebar switch for Panigale V4/S
$345.6Throttle control with integrated handlebar switch for Panigale V4/S
Throttle control entirely machined from solid Ergal, significantly more durable than the original plastic component.
In the event of a crash, it offers enhanced protection for the internal electronics and integrates the electrical controls found in the original throttle assembly.
ATTENTION: Use your original electronic throttle unit. The electronic throttle is not included in the kit.
Bush for wheel hub (MV Agusta)
$70.8Bush for wheel hub (MV Agusta).
Made of anodized aluminum 7075.
Side stand eliminator for BMW R NINE T
$28.8Side stand eliminator for BMW R NINE T
The side stand eliminator is a plug-and-play electronic device that simulates the presence of the original side stand switch. Ideal for track use, it allows the bike to start even without the stand installed, with no need to modify the original wiring.
Wiring for Aprilia integrated Stopwatch
$36.0Optional wiring for Aprilia integrated Stopwatch connection (2009/2016 V4 models).
Allows you to use the motorbike’s integrated stopwatch via additional external button (included) or by connecting it to the high beam button on our left handlebar switch JP PLS 009.
(Compatible with both JP PLS 009 e JP PLSR 009TC)
Right Street Handlebar Switch for Yamaha YZF-R1/M (I2M) (Misaligned holes)
$237.6Right Street Handlebar Switch for Yamaha YZF-R1/M (I2M) (Misaligned holes)
Jetprime handlebar switches are interchangeable with the original switches and can be applied to the motorcycle handlebar without needing any further modifications. Plug and play product specific to each motorcycle model.
ATTENTION: this handlebar switch is designed to be mounted on the brake master cylinder in place of the original clamp. It is important to check the arrangement of the mounting holes present on your brake master cylinder to choose the correct version.
ATTENTION: for I2M electrical system only.
Right Street Handlebar Switch for Yamaha YZF-R1/M (I2M) (Aligned holes)
$237.6Right Street Handlebar Switch for Yamaha YZF-R1/M (I2M) (Aligned holes)
Jetprime handlebar switches are interchangeable with the original switches and can be applied to the motorcycle handlebar without needing any further modifications. Plug and play product specific to each motorcycle model.
ATTENTION: this handlebar switch is designed to be mounted on the brake master cylinder in place of the original clamp. It is important to check the arrangement of the mounting holes present on your brake master cylinder to choose the correct version.
ATTENTION: for I2M electrical system only.
Rear hub for MV Agusta (Blue)
$594.0Rear hub for MV Agusta (Blue)
The Jetprime rear wheel hub is designed to offer greater rigidity and strength compared to the original component.
Fully machined from solid Avional, it ensures secure tightening of the swingarm bolts without any risk of damaging the bearings.
It features a roller bearing on the sprocket side and two high-performance ball bearings on the wheel side, lubricated with a special high-temperature-resistant grease to guarantee maximum reliability and long service life.
Replaces the following original part numbers:
8000B7317
8000C4104
Tail light eliminator for Ducati Panigale 1299/S/R
$28.8Tail light eliminator for Ducati Panigale 1299/S/R
The tail light eliminator is a plug-and-play electronic device that simulates the presence of the original tail light, allowing its removal without triggering dashboard errors.
ABS eliminator for Aprilia RS/TUONO/TUAREG 660
$234.0ABS Eliminator for Aprilia RS/TUONO/TUAREG 660.
For a racing use, the original ABS work is not suitable because it lengthens the breaking too much, especially in low grip conditions.
Our device allows to remove the ABS modulator from the bike, saving about 1 kg of weight.
No error lights will be lit on the dashboard and all normal functions will work properly.
ABS eliminator for Ducati Scrambler 800/SIXTY2
$234.0ABS Eliminator for Ducati Scrambler 800/SIXTY2.
For a racing use, the original ABS work is not suitable because it lengthens the breaking too much, especially in low grip conditions.
Our device allows to remove the ABS modulator from the bike, saving about 1 kg of weight.
No error lights will be lit on the dashboard and all normal functions will work properly.
Quick throttle unit for Yamaha YZF-R1
$417.6Quick throttle unit for Yamaha YZF-R1
Digital quick throttle made of CNC-machined solid Ergal.
Gives the rider the sensation of using a traditional steel-cable throttle.
60-degree rotation angle.
ABS eliminator for Yamaha T-MAX 530 2015/2016
$198.0ABS Eliminator for Yamaha T-MAX 530 2015/2016.
For a racing use, the original ABS work is not suitable because it lengthens the breaking too much, especially in low grip conditions.
Our device allows to remove the ABS modulator from the scooter, saving about 1 kg of weight.
No error lights will be lit on the dashboard.
Canada
USA
Japan